Quick info on how to start disassembling a DELL 2209WAf monitor. No pictures this time, but perhaps it will help. Remove the stand and the 4 screws behind the stand. These are the only screws in the case Pry the front bezel off. Do the corner with the buttons last. You may leave the front… Read More »
The Samsung SyncMaster 225BW LCD monitor does not support pivoting. However, modifying the monitor so that it is fixed in portrait mode proved to be very easy. After it is done, the height adjustment of the stand is affected – in its highest position the bottom of the screen bezel is about 87mm from the… Read More »
My 12-year old Casio scientific calculator LCD stopped showing a couple of rows recently. After taking it apart, i found a flexible ribbon cable either glued or soldered to the edge of the PCB. As a first try, I heated the connection a little and it worked. Some slight finger-poking helped to find which part… Read More »
I’ve been working on a project that uses the inexpensive and easily obtainable and programmable LCD panel from Nokia 3310 mobile phone. I’m posting some of the source code here because it was quite hard to find a ready-made driver on the web. The code was tested on an ARM-based microcontroller. Add pin definitions, sleep… Read More »